Forum | Marketplace | Knowledge Base | | H1 site | H2 site | H3 site | |||
|
|
The Hummer Knowledge Base
My Passanger arm rest just went limp. Don't know why. Does not respond to the screw at the end. Any ideas for a fix? Please I have tried viagra, this is serious. There is a pin that holds the armrest to the chair. That has backed out of the hole. VERY easy to fix! Remove the armrest from the seat by removing the two bolts that hold it in. You should then be able to pull the armrest off the piece that you just unbolted and see where the pin is supposed to go. I was able to move the leather around enough to put the pin back in place and used a pair of pliers to press it in, Once you remove it from the seat, you'll see just how easy it is. DON'T try to remove the piece of plastic by the adjustment knob. That is a huge PITA.
Ray
|