Forum | Marketplace | Knowledge Base | | H1 site | H2 site | H3 site
Click here for a listing of all HUMMER Network sponsors

Hummer Knowledge Base

The Hummer Knowledge Base

Replacing Tail Light Bulbs on an H2:

When replacing your burnt out bulb:

  1. Remove the 2 star screws
  2. Pull rear light housing toward center of truck - Do Not pull straight out...If you hear something snap you've broken the metal fastener
  3. Turn bulb adapter and change bulb
  4. Reverse procedure to install.
If you break the metal fastener or tail light clip "Like I did" ...You can order the part from alldiscountparts.com

part#: GM#12335952

It is an exact replacement for the taillight clips.

h1sp

Back to main page

The Hummer Knowledge Base is a collection of informative posts from the Hummer Network forums and mailing lists, contributed material and links to outside web sites.
The Hummer Network is not responsible for the accuracy of the information contained herein or on outside web sites, nor for any situation arising from the use thereof.
© 2006-2011 by The Hummer Network. No material from the Hummer Knowledge Base may be reprinted or republished in any form without permission.